$ CAD
Description
This kit is designed to adapt the frame of a 88-98 C10 pickup (Long or Short Bed) to accept a 12-21 Model S or 15-21 Model X Tesla rear subframe/motor assembly.
• Steel construction
• Powdercoated finish
• Hardware included
• Simplifies installing a Tesla cradle into your EV conversion
• Allows use of aftermarket coil over shock with lower mounting when when used with PN: HEV001-001
• Increases rigidity of the factory C10 frame
Information:
Wheel recommendations: The Tesla suspension has a wider track width than the O.E. truck track width does. In order to fit wheels and tires in the fender wells without modifications we recommend using 10″ wide wheels with an 8″ backspace measurement to optimize clearance with the outer fender and the frame rail on the inner side. Wider wheels will not fit without modification. If narrower wheels are chosen the backspace should be calculated in a fashion that keeps the position of the outer face of the wheel in the same location (width should be removed from the inside of the wheel).
